Detailed introduction

product description
110ton Hot Press Through PLC-HMI Programmed Control is intelligent CNC hot press, with PLC, pressure sensor, temperature sensor, HMI and other exact numberical control electrical parts can set and display the main parameter such as pressure,temperature,time and safety, all the message from the LCD screen interface can lead the operator, so that reduce teh troubles and scrap rate, and prevent the machine from being damaged.
Laminating hot press is fit for the furniture factory or panel secondary processing plant, which can make lamination for furniture panel,building partition, wooden door or laminate all kinds of decorative material on man-made board. It also can be used for drying or leveling veneer.
 
Main features:
1.  Adopt solid drilled conduction board, warming up faster,  uniform thermal conductivity, and energy consumption lower.
2. Omron or Schneider main electric components, it is stable and durable.
3. Hawe valve from German for auto-open hydraulic valve, high holding pressure, reliable performance, less human factors.
4. Piston mode for cylinder. Grind, plate hard chromium on the surface and polish piston
after heat treatment. It is durable and high precision. Adopt special seal-rings for reliability and durability.
5. Mylar for in and out of the hose, external spoke flexible reinforced,  using cycle is long and difficult to damage.
6. Configure pull E-stop switch, temperature secondary protection equipment.
 
Technical parameter:

Model	jz4X8/4-15H1RC(S)	jz8X5/5-15H1RC(S)
Total pressure	4000kN	5000kN
Working layers	12	18
Unit surface pressure	3.7kgf/cm2	2.7kgf/cm2
Platen No.& Size	4-2500x1300x42mm	4-3000x1500x42mm
Opening	120mm	120mm
Cylinder No.& Diameter	8-φ85mm	8-φ85mm
Heating way	electric heated with thermal oil	electric heated with thermal oil
Installed power	52.75kw	77.5kw
Closed speed	40mm/s	30mm/s